Hole Products - Products

PWL Wireline

PWL Wireline Head Assembly
PWL HEAD ASSEMBLY PARTS
ITEM	PART #	DESCRIPTION
1-27	2000083	HEAD ASSEMBLY
1	1800185	SPEARHEAD POINT
2	1950270	DETENT COMPRESSION SPRING
3	1800195	DETENT PLUNGER
4	2000045	SPEARHEAD BASE
5	1950190	SPIRAL PIN, 7/16” X 1”
6	2000150	LATCH RETRACTING CASE
7	1800215	SPRING PIN, 1/2" X 2 3/4"
8	2000033	LATCH SPRING
9	2000130	LATCH
10	1950200	SPRING PIN, 1/2" X 2"
11	1800235	SPRING PIN, 3/8" X 2"
12	2000135	LATCH SUPPORT
13	2000155	UPPER LATCH BODY
14	2000050	LANDING SHOULDER
15	1800050	STAINLESS STEEL BALL 22 MM
16	2000140	BUSHING
17	2000145	LOWER LATCH BODY
18	2000160	HEX NUT
19	2000165	SPINDLE
20	2000016 *	SHUT-OFF VALVE, HARD
21	2000017	VALVE ADJUST WASHER
22	1800081	THRUST BEARING
23	2000170	HANGER BEARING
24	2000175	SPINDLE BUSHING
25	2000180	INNER TUBE COMPRESSION SPRING
26	2000185	SELF LOCKING NUT
27	2000190	INNER TUBE CAP ASSEMBLY (ITEMS: 27.1-27.4)
27.1	1800115	HYDRAULIC GREASE FITTING
27.2	1800120	STAINLESS STEEL BALL
27.3	2000018	INNER TUBE CAP
27.4	2000195	CHECK VALVE BODY
* Additional options available. Head assembly’s are equipped with a landing indicator (item 15-16). The ball must be reset after each use. This can be done by prying the ball back through the bushing. If you do not wish to use the landing indicator, simply remove the ball. Use of the landing indicator requires a pump capable of producing 300PSI to activate indicator.

PWL Core Barrel Assembly
PWL COMPLETE CORE BARREL ASSEMBLY
ITEM	PART #	DESCRIPTION
1-11	2000011	CORE BARREL ASSEMBLY 5FT
1-11	2000012	CORE BARREL ASSEMBLY 10FT

PWL COMPLETE INNER TUBE ASSEMBLY
ITEM	PART #	DESCRIPTION
1-5	2000125	INNER TUBE ASSEMBLY 5FT
1-5	2000120	INNER TUBE ASSEMBLY 10FT

PWL CORE BARREL PARTS
ITEM	PART #	DESCRIPTION
1	2000083	HEAD ASSEMBLY
2	2000004	INNER TUBE 5FT
2	2000003	INNER TUBE 10FT
3	2000010	STOP RING
4	2000000 *	CORE LIFTER FLUTED
5	2000005	CORE LIFTER CASE
6	2000081 *	LOCKING COUPLING, FULL HOLE
7	2000080	ADAPTER COUPLING
8	2000020	LANDING RING
9	2000007	OUTER TUBE 5FT
9	2000026	OUTER TUBE 10FT
10	2000015	BRASS INNER TUBE STABILIZER RING
11	**	REAMING SHELL
12	**	CORE BIT
* Additional options available. *** Reaming shell and core bit not included in the core barrel assembly.