NWL Wireline

NWL Wireline Head Assembly
NWL HEAD ASSEMBLY PARTS
ITEM	PART #	DESCRIPTION
1-27	1950140	HEAD ASSEMBLY
1	1800185	SPEARHEAD POINT
2	1950270	DETENT COMPRESSION SPRING
3	1800195	DETENT PLUNGER
4	1950185	SPEARHEAD BASE
5	1950190	SPIRAL PIN, 7/16" X 1"
6	1950195	LATCH RETRACTING CASE
7	1950200	SPRING PIN, 1/2" X 2"
8	1950205	LATCH SPRING
9	1950210	LATCH
10	1950215	SPRING PIN, 1/2" X 1 1/2"
11	1950220	SPRING PIN, 1/4" X 1 1/2"
12	1950225	LATCH SUPPORT
13	1950235	UPPER LATCH BODY
14	1950040	LANDING SHOULDER
15	1950045	STAINLESS STEEL BALL 22 MM
16	1950050	BUSHING
17	1950145	LOWER LATCH BODY
18	1950055	HEX NUT
19	1950060	SPINDLE
20	1950065 *	SHUT-OFF VALVE, HARD
21	1950070	VALVE ADJUSTING WASHER
22	1950075	THRUST BEARING
23	1950085	HANGER BUSHING
24	1950080	SPINDLE BEARING
25	1950090	INNER TUBE COMPRESSION SPRING
26	1950095	SELF LOCKING NUT
27	1950150	INNER TUBE CAP ASSEMBLY (ITEMS: 27.1-27.4)
27.1	1950125	HYDRAULIC GREASE FITTING
27.2	1950130	STAINLESS STEEL BALL
27.3	1950100	INNER TUBE CAP
27.4	1950135	CHECK VALVE BODY
* Additional options available.    Head assembly’s are equipped with a landing indicator (item 15-16). The ball must be reset after each use. This can be done by prying the ball back through the bushing. If you do not wish to use the landing indicator, simply remove the ball. Use of the landing indicator requires a pump capable of producing 300PSI to activate indicator.

NWL Core Barrel Assembly
NWL COMPLETE CORE BARREL ASSEMBLY
ITEM	PART #	DESCRIPTION
1-10	1950245	CORE BARREL ASSEMBLY 5FT
1-10	1950250	CORE BARREL ASSEMBLY 10FT
NWL COMPLETE INNER TUBE ASSEMBLY
ITEM	PART #	DESCRIPTION
1-5	1950355	INNER TUBE ASSEMBLY 5FT
1-5	1950350	INNER TUBE ASSEMBLY 10FT
NWL CORE BARREL PARTS
ITEM	PART #	DESCRIPTION
1	1950140	HEAD ASSEMBLY
2	1950020 *	INNER TUBE 5FT
3	1950025 *	INNER TUBE 10FT
	1950010	STOP RING
4	1950005 **	CORE LIFTER FLUTED
5	1950000	CORE LIFTER CASE
6	1950105 **	LOCKING COUPLING, FULL HOLE
7	1950110	ADAPTER COUPLING
8	1950115	LANDING RING
9	1950030	OUTER TUBE 5FT
	1950035	OUTER TUBE 10FT
10	1950120	BRASS INNER TUBE STABILIZER RING
11	***	REAMING SHELL
12	***	CORE BIT
* Optional chrome plated inner tubes available. ** Additional options available. *** Reaming shell and core bit not included in the core barrel assembly.