HWL Wireline Head Assembly
| | HWL ASSEMBLY PARTS | | ITEM | PART # | DESCRIPTION | | 1-27 | 1800180 | HEAD ASSEMBLY | | 1 | 1800185 | SPEARHEAD POINT | | 2 | 1950270 | DETENT COMPRESSION SPRING | | 3 | 1800195 | DETENT PLUNGER | | 4 | 1800200 | SPEARHEAD BASE | | 5 | 1950190 | SPIRAL PIN, 7/16" X 1" | | 6 | 1800210 | LATCH RETRACTING CASE | | 7 | 1800215 | SPRING PIN, 1/2" X 2 3/4" | | 8 | 1800220 | LATCH SPRING | | 9 | 1800225 | LATCH | | 10 | 1950200 | SPRING PIN, 1/2" X 2" | | 11 | 1800235 | SPRING PIN, 3/8" X 2" | | 12 | 1800240 | LATCH SUPPORT | | 13 | 1800250 | UPPER LATCH BODY | | 14 | 1800045 | LANDING SHOULDER | | 15 | 1800050 | STAINLESS STEEL BALL 22 MM | | 16 | 1800055 | BUSHING | | 17 | 1800040 | LOWER LATCH BODY | | 18 | 1800060 | HEX NUT | | 19 | 1800065 | SPINDLE | | 20 | 1800071 * | SHUT-OFF VALVE, HARD | | 21 | 1800075 | VALVE ADJUST WASHER | | 22 | 1800081 | THRUST BEARING | | 23 | 1800095 | HANGER BEARING | | 24 | 1800085 | SPINDLE BUSHING | | 25 | 1800100 | INNER TUBE COMPRESSION SPRING | | 26 | 1800105 | SELF LOCKING NUT | | 27 | 1800285 | INNER TUBE CAP ASSEMBLY (ITEMS: 27.1-27.4) | | 27.1 | 1800115 | HYDRAULIC GREASE FITTING | | 27.2 | 1800120 | STAINLESS STEEL BALL | | 27.3 | 1800110 | INNER TUBE CAP | | 27.4 | 1800125 | CHECK VALVE BODY | * Additional options available. Head assembly’s are equipped with a landing indicator (item 15-16). The ball must be reset after each use. This can be done by prying the ball back through the bushing. If you do not wish to use the landing indicator, simply remove the ball. Use of the landing indicator requires a pump capable of producing 300PSI to activate indicator. |
 HWL Core Barrel Assembly | | HWL COMPLETE CORE BARREL ASSEMBLY | | ITEM | PART # | DESCRIPTION | | 1-10 | 1800160 | CORE BARREL ASSEMBLY 5FT | | 1-10 | 1800165 | CORE BARREL ASSEMBLY 10FT |
|
|
| | HWL COMPLETE INNER TUBE ASSEMBLY | | ITEM | PART # | DESCRIPTION | | 1-5 | 1800325 | INNER TUBE ASSEMBLY 5FT | | 1-5 | 1800320 | INNER TUBE ASSEMBLY 10FT |
|
|
| | HWL CORE BARREL PARTS | | ITEM | PART # | DESCRIPTION | | 1 | 1800180 | HEAD ASSEMBLY | | 2 | 1800005 | INNER TUBE 5FT |
| 1800025 | INNER TUBE 10FT | | 3 | 1800020 | STOP RING | | 4 | 1800015 * | CORE LIFTER FLUTED | | 5 | 1800010 | CORE LIFTER CASE | | 6 | 1800090 * | LOCKING COUPLING, FULL HOLE | | 7 | 1800130 | ADAPTER COUPLING | | 8 | 1800135 | LANDING RING | | 9 | 1800030 | OUTER TUBE 5FT |
| 1800035 | OUTER TUBE 10FT | | 10 | 1800260 | BRASS INNER TUBE STABILIZER RING | | 11 | ** | REAMING SHELL | | 12 | ** | CORE BIT |
* Additional options available.
** Reaming shell and core bit not included in the core barrel assembly. |
|
