Hole Products - Products

H3WL Wireline

H3WL Wireline Head Assembly
H3WL HEAD ASSEMBLY PARTS
ITEM	PART #	DESCRIPTION
1-27	1800180	HEAD ASSEMBLY
1	1800185	SPEARHEAD POINT
2	1950270	DETENT COMPRESSION SPRING
3	1800195	DETENT PLUNGER
4	1800200	SPEARHEAD BASE
5	1950190	SPIRAL PIN, 7/16" X 1"
6	1800210	LATCH RETRACTING CASE
7	1800215	SPRING PIN, 1/2" X 2 3/4"
8	1800220	LATCH SPRING
9	1800225	LATCH
10	1950200	SPRING PIN, 1/2" X 2"
11	1800235	SPRING PIN, 3/8" X 2"
12	1800240	LATCH SUPPORT
13	1800250	UPPER LATCH BODY
14	1800045	LANDING SHOULDER
15	1800050	STAINLESS STEEL BALL 22 MM
16	1800055	BUSHING
17	1800040	LOWER LATCH BODY
18	1800060	HEX NUT
19	1800065	SPINDLE
20	1800071 *	SHUT-OFF VALVE, HARD
21	1800075	VALVE ADJUST WASHER
22	1800081	THRUST BEARING
23	1800095	HANGER BEARING
24	1800085	SPINDLE BUSHING
25	1800100	INNER TUBE COMPRESSION SPRING
26	1800105	SELF LOCKING NUT
27	1800285	INNER TUBE CAP ASSEMBLY (ITEMS: 27.1-27.4)
27.1	1800115	HYDRAULIC GREASE FITTING
27.2	1800120	STAINLESS STEEL BALL
27.3	1800110	INNER TUBE CAP
27.4	1800125	CHECK VALVE BODY
* Additional options available. Head assembly’s are equipped with a landing indicator (item 15-16). The ball must be reset after each use. This can be done by prying the ball back through the bushing. If you do not wish to use the landing indicator, simply remove the ball. Use of the landing indicator requires a pump capable of producing 300PSI to activate indicator.

H3WL Core Barrel Assembly
H3WL COMPLETE CORE BARREL ASSEMBLY
ITEM	PART #	DESCRIPTION
1-11	1750030	CORE BARREL ASSEMBLY 5FT
1-11	1750035	CORE BARREL ASSEMBLY 10FT

H3WL COMPLETE INNER TUBE ASSEMBLY
ITEM	PART #	DESCRIPTION
1-6	1750140	INNER TUBE ASSEMBLY 5FT
1-6	1750135	INNER TUBE ASSEMBLY 10FT

H3WL CORE BARREL PARTS
ITEM	PART #	DESCRIPTION
1	1800180	HEAD ASSEMBLY
2	1750065	SPLIT INNER TUBE LINER SS 5FT(1.5M)
2	1750070	SPLIT INNER TUBE LINER SS 10FT(3M)
3	1800005	INNER TUBE 5FT
3	1800025	INNER TUBE 10FT
4	1750050	STOP RING
5	1750020 *	CORE LIFTER FLUTED
6	1750025	CORE LIFTER CASE
7	1800090 *	LOCKING COUPLING, FULL HOLE
8	1800130	ADAPTER COUPLING
9	1800135	LANDING RING
10	1800030	OUTER TUBE 5FT
10	1800035	OUTER TUBE 10FT
11	1800260	BRASS INNER TUBE STABILIZER RING
12	**	REAMING SHELL
13	**	CORE BIT
* Additional options available. ** Reaming shell and core bit not included in the core barrel assembly.